Hello,
Please your help I need to make a Good Receipt movement of a production order, which has a co-products, the problem appears because I need that SAP only shows the coproducts in the MIGO, not the list of the co-products and the principal material.
When I make the MIGO - material Mov 101
Thanks,
MP
Dear Seniors,
We have currently 4 production order types in our system.
When the order is released, the order is printed automatically.
We want one of the Order Types to be printed only manually
Do you know where to configure that ?
Many thanks,
Hi gurus,
Need some guidance on the scenario below :
MRP run for material A
MRP type : VB
Lot size: EX
Maximum Lot Size : 200
Material A is a component of material Z. From a previous planned order of material Z, the requirement quantity of material A is 5000.
Now, after the MRP run for material A was done, a PR was generated with quantity of 5000.
My question is why was the PR generated with the requirement quantity of 5000 and not only did not obey the maximum lot size but exceeded it as well?
Thanks.
The last week some people created a transport for transaction COR4 and we lost the information of the table s026, we need restructure this information again.
We lost the information of the last 3 years, only we have the new movements of consumption.
How we can rebuild this table (S026)?
Hi GURU,
my requirement is to how i know the planned order of material for quantity because when i create a plan order of a material for
a particular date with quantity of 100 and suppose i confirm using mfbf only 50 so the planned order decrease with remaining quantity 50.
when i go to table PLAF is also show 50 quantity against that planned order.
please suggest me to how i know i much quantity"s planned order i created please suggest me any table, badi, bapi, or functional module
so i can develops a z reports as per my client requirment.
I created in cs01 bom 2 but when creating bom2 selection pop up am not getting please help me how to rectify it
Hi experts can you please tell me what is the difference means strategy and LSF VSF functions
Dear Expert ,
Our organization is a nature of process industry and production plan are changing frequently , as result every time we need modify PIR and then we have perform MRP RUN through t-code MD02 . This is very tedious to end user .
Hence we want to develop a tool , after changes of plan figure , at the end day , from PBIM and PBED combination, MRP RUN will run will perform atomically.
Please help me how to do the configuration .
Regards,
Amit Biswas
Hello experts -
I want to know when we create control cycle using LPK1 transaction and fill in the kanban fields it is not appearing on kanban board
could you please clarify whether the same kanban board can be used for control cycles created using LPK1 or will it only support for materials
created with PK01 control cycle.
Look forward for answers....
Dear Expert ;
I want to allow the scheduling in the past only in LTP.
I maintain scheduling type as backward 365 days ( in OPU5) on my scenario but it does not work .
so I add start in the past in " paramter for determining the basic dates" it work in my scenario and also in the real time ?
I just want this option in LTP .
any help?
Dear Experts,
We are facing issue in BOM change with change number.
We replaced A,B,C with X,Y,Z in the BOM with a change number with valid
from date in 2016.
But the system showing the requirement of X,Y,Z in current date,
that is in 2015.
Also it is showing the requirement of A,B,C also.
We need only A,B,C requirment only which is present in the current BOM
and not X,Y,Z which is valid from 2016.
We noticed that, two change numbers with same valid from date, used to change X,Y,Z
with INN and IND status.
Please explain, how to remove the requirement of X,Y,Z from the system.
Thanks in advance.
Regards,
Suresh.
Hi Gurus ,
We have few BOM ‘s & after that created the routing & assigned all the components to the routing operation , it was showing entry in table ”PLMZ” correctly & then after we deleted the BOM line item & recreated the same & then we found that BOM’S assignment to the routing has been removed .
We Checked the table “PLMZ” but its still showing the same entries & not reflecting in this table .
Can we have any table which shows the BOM’S whose assignment has been removed from the routing operation ?
Thanks ,
Regards,
Aman
Hi,
We have a process were waste are generated during the production process but are not measurable at each production order level.
Waste are accumulated at one place and after one week stock are brought in system through 501 mvt and then one special production order is created which have recursive BOM and material good receipt and good issue is carried out at confirmation.
Please confirm whether their is some other alternative for this process. As using 501 mvt is very risky.
Regards,
Sun
Dear all,
here is the situation I met in my company :
My production ordrers are defined in a collective order model.
A consums B
B consums C and D
C consums D
When I create an order, here is the result
Order for A
Order for B
Order for C
Order for D
Order for D
In reality, we would like to get only one order in my collective Order model for product D.
Is there a way to ask SAP to creeate only 1 order by product, Inside a collective order ?
Thansk for your help
Pierre
Hello All,
I am trying to cancel production order confirmation by using T code CO13.
It is showing error 12018 in Goods movement, "Enter Date of Production".
The material is batch managed, the date of production in production order & in the batch for the material is same.
Shelf life Exp. date is two years ahead.
What is wrong??????
Hi All,
Can you Pl let us know the BAPI for Process order confirmation which are done by COR6.
Requirement is, we want to Partial confirm the Process order with Goods Movement as 261 ( Goods Issue For components)
Currently I am using FM- BAPI_PROCORDCONF_CREATE_HDR.
After executing this FM , it is giving me message as Process order confirmed but actually No Goods movement is posted and PCNF status is not marked.
Can you Pl suggest if any step/ data is missing.
Thanks in advance.
Regards,
Sachin
hi,
we have MD4C report where we want to download the output of that report
with few fields.
Problem here is that it displays/downloads all the fields of which few
we do not need. So when we checked the layout it displays a default
layout.
Now is it possible that we can create a layout for the fields which we
need. Because we tried but its not giving the output as needed.
Please assist.
Thanks & Regards,
Nikhil
Hi
we have created a new hierarchy: but when we run CM01 to display the load / capacity , the load is not display
the load is display for the hierarchy earlier in the past ..but since several weeks one a new Work center hierarchy is created there is no more load display in CM01
the setting in the general / setting is correctly set up ( cumulation of requirement is checked)
i don't see the reason why the load s not display anymore in new hierarchy when the load can still be display in the old hierarchy
Thanks you
Laurent VILA
Plant 1000 - Finished product A - this product sold only to customers
plant 2000 - Product B - this product is sold to customers and also to plant 1000
for product B we want to use MTO scenario (but we will plan components of product B) and for finished product A we want to use MTS scenario.
there will be STO's placed on plant 2000 from plant 1000 for product B. if I use MTO strategy for product B in 2000, how can I make the STO coming from plant 1000 behave like a sales order? what strategy shoudl I used for MTO product B...
Hello,
I am developing an application which will update the process order - operation details (like Quantity ).
Please suggest me a BAPI or FM which will update the operation information .
Thanks ,
Shaira .